Satin Enamel

The right choice for that satin smooth and radiant feel! An oil based product, the Deluxe Coatings Satin Enamel is perfectly suited for all interior doors, frames, timberwork and metal surfaces. Choose the Deluxe Coatings Satin Enamel for great aesthetic value and superior protective capabilities.
To get the best results from Deluxe Coatings Satin Enamel, follow the instructions below:

Surface preparation:

  • All surfaces must be clean, dry and free from dust, wax, grease, etc.

Coating type:

  • Alkyd based Interior Coating.

Application:

  • Suitable for brush, roller and airless spray.
  • Apply 1 coat Deluxe Acrylic Undercoat.
  • On normal surfaces apply 2 coats Deluxe Satin Enamel.
  • Re-coat time is 24 hours.

Do not apply if surface temperature is less than 12°C.

Coverage rate:

  • 12 -14 square metres per litre (approximately).

Drying time:

  • Surface drying time is 6-8 hours. However, allow 24 hours between coats.

Thinner:

  • Mineral Turpentine