Flat Enamel

Water stained ceilings and eaves will never be a problem again with Deluxe Coatings Flat Enamel coating. This oil based product is specifically designed to seal up any water staining and prevent the damage and unattractive look that comes with it.

Surface preparation:

  • All surfaces must be clean, dry and free from dust, wax, grease, etc.

Coating type:

  • Alkyd based Interior Coating.

Application:

  • Suitable for brush, roller and airless spray.
  • Apply 1 coat Deluxe Acrylic Undercoat.
  • On normal surfaces apply two coats Deluxe Flat Enamel.
  • Re-coat time is 24 hours.

Coverage rate:

  • 12 -14 square metres per litre (approximately).

Drying time:

  • Surface drying time is 6-8 hours. However, allow 24 hours between coats.

Thinner:

  • Mineral Turpentine