Satin Sheen

Your walls will be an absolute delight to look at and touch with our Satin Sheen paints. They provide a glorious radiance to the surroundings and exude a positive vibe. It is a great choice if a classy and elegant appearance is what you are looking for. Available in a range of colours and if required can be custom produced to match a colour of your choice.

Deluxe Coatings Satin Sheen is suitable for use on multiple types of surfaces including gyprock, hardwall plaster, brick, cement, cement render, galvanised iron and timber.
To get the best results from Deluxe Coatings Satin Sheen, follow the instructions below:

Surface preparation:

  • All surfaces must be clean, dry and free from dust, wax, grease, etc.
  • Loose, powdery or chalky surfaces should be brushed down thoroughly and sealed with a solvent based primer e.g. Deluxe Coatings Super Seal.

Coating type:

  • Acrylic Resin based Interior and Exterior Coating with excellent washability.

Application:

  • Suitable for brush, roller and airless spray.
  • On normal surfaces apply 2 coats. First coat may be thinned with up to 10% water.
  • Apply second coat direct from container. Allow 2 hours between coats.

Do not apply if surface temperature is less than 12°C.

Coverage rate:

  • 12 -14 square metres per litre (approximately).

Thinner:

  • Water